Vehicle Tracker


Rs: 15,000

X1 Multi-functional Vehicle GPS Tracker

Pinpoint vehicles with this innovative X1 vehicle GPS tracker. Through easy-to-use platform, it provides you up-to-the-minute speed, location updates and various alerts and reports. Apart from functions like two-way talk, voice monitoring, X1 is also equipped with multiple interfaces for camera, LCD, RFID, etc. It is an invaluable tool for fleet management, logistics, car rental and buses.

order place order place order place


  • GPS+GSM positioning High accuracy GPS positioning with U-Blox chipset
  • RS232 Rich peripherial accessories supporting fuel level sensor, RFID reader, camera, etc
  • Two-way talk With MIC and speaker, it realizes two-way communication
  • Multiple alarms & reports Fuel cut-off/geo-fence alarm and direction change/mileage report, etc
  • 1-Wire® Interface for temperature sensors and i-Button driver ID
  • FOTA Firmware upgrade using GPRS network
  • Internal 3-axis accelerometer Driving behavior monitoring, power saving and motion detection
  • Bullt-in battery Low power consumption and long standby with internal 600mAh battery



GSM Specification
Communication system GSM
GSM module SIMCOM800
GSM frequency GSM 850/900/1800/1900MHz
GPS module U-blox7Q
Location accuracy <10 meters
Tracking sensitivity -161dBm
Switch 1 SOS Button, 1 power switch
LED indicator 3 LED lights indicating GPS/GSM/External power status
Input voltage DC 11~36V/1.5A
Flash memory 8MB ( GPRS data 20400 units, SMS data 700 units)
Sensor 3D accelerator sensor
Operating temperature -20℃ ~+70 ℃
Device weight 160g
Device dimension 90×60×27mm
TTFF (open sky) Avg. hot start ≤1sec
Avg. cold start ≤35sec
Humidity 5%~95%
Battery 600mAh/3.7V
Internal Battery Life 15 hours in sleep mode, and 6 hours in normal working mode
Power consumption 30-35mA standby current
Max output 4 Digital inputs - 1 negative input, 1 positive input, 2 custom input (Default 1 positive input, 1 negative input )
2 Analog input
AD1: 0~6V
AD2: 0~12V
2 Output
1 RS232 port (camera/RFID reader/ two-way calling)
1-Wire protocol (Temperature sensor/i-Button)
1 Impulse detection (Default speedometer detection)
1 USB port